GTI ACQUA CONCEPT
Waterborne system for car refinishing
With excellent covering power, easy to apply and to be covered with OPACLEAR SUPRA 4:1 and OPACLEAR HS 2:1 SCRATCH RESISTANCE.
One thin coat and one wet, wait for the total evaporation until the coat has a completely matt finish.
Complying with European Directive 2004/42/CE concerning the limitation of emissions of volatile organic compounds.
TDS 2004/42/IIB(d)
OPABASE ACQUA < 420 g/l
OPACLEANER
Water degreaser for OPABASE ACQUA system.
Before and after all sanded processes should be used OPACLEANER.HIDROPRIM
One component anti-rust waterbone primer.
Isolating primer with fast drying, designed for all fast refinishing car repairs, used on all kinds of substrates.It has a good hiding power, giving smooth finishing, easy to sand. That provides very good adhesion on all supports as stainless steel, iron, galvanised, cooper, PVC, ...
MIXING SYSTEM
OPACRYL UHS
2K ACRYLlC TOP-COAT FOR CAR REFINISHINGMixing Set of 19 tinting bases.
It is paint system for single coat, acrylic high solid contain, cured with isocyanate hardener. It is giving excellent covering power, without any yellowing problem, and with excellent resistance. It can dry by oven or air drying.
(VOC/COV's < 420 g/l)
SPECIAL TOPCOATS
OPABASE MAGIC COLORS
COLOURS WITH SPECIAL EFFECTSColour shade changes depending on the angle vision.
It can be used as a basecoat by spraying previously a GESPAINT BLACK Basecoat.
(VOC/COV's < 840 g/l)
CLEARS
OPACLEAR SUPRA 420 2K 4:1
Acrylic lacquer with very high solids, cured with isocyanate hardener, for the 2K system. With a very low content of solvent, respecting the European Directive 2004/42/CE concerning the limitation of emissions of volatile organic compounds. Excellent surface aspect in terms of gloss, it does not yellow and has very high quality. Designed for bodywork and manufacturing applications. Can be dried in stove or at room temperature. It has excellent chemical and mechanical resistance.(VOC/COV's < 420 g/l)
OPACLEAR SUPRA AR 2K 4:1
It is a new generation 2K acrylic clear, cured with isocyanate hardener. It can be used for car repair over base coat system, on OPABASE solvent borne or OPABASE ACQUA waterborne.It is easy to spray with an excellent surface aspect in terms of gloss, with high chemical and mechanical resistance proprieties, providing a high scratch resistance during a long time.
(VOC/COV's < 840 g/l)
OPACLEAR 2K
Clear ready to use in aerosol.Acrylic clear for the 2K system.
OPACLEAR HS 2:1
CLEAR LACQUER ACRYLIC SCRATCH RESISTANCE.2K clear lacquer, acrylic, isocyanate cured, designed for the basecoat system.
It provides excellent finish with good gloss level and durability. It does not yellow. Designed for bodywork and manufacturing applications. Can be dried in stove or at temperature. Ih has excellent chemical and mechanical resistance.
(VOC/COV's < 840 g/l)
ACCESSORIES PRODUCTS
OPA 870
LIQUID POLISH GLOSS AND SURFACE PROTECTORApplies a polymer·based film.
Provides a deep, long lasting gloss.
OPA 852
FINE PASTE COMPOUND.
OPADEGREASER
DEGREASER FOR CAR REFINISHING (PANEL WIPE).It is hydrocarbons free degreaser, it has been formulated for cleaning car bodies and fillers, and plastic spare parts.
The use is done before and sanding operation and before top coat application.
(VOC/COV's < 850 g/l)
OPAMASTIC
POLYESTER PUTTY SOFT, is for spatula use, and bodywork repair.(VOC/COV's < 250 g/l)
OPAWASH
PHOSPHATE VINYL PRIMER, for a perfect corrosion protection, and can be recoated with polyurethane or alkyd topcoats.Perfect adhesion over all type of metallic substrates: iron, aluminium, stainless steel, galvanised, electro zinged.
(VOC/COV's < 780 g/l)
OPAFILLER 1K
1K ISOLATING PRIMER with fast drying, designed for car refinish repairs, used on all kinds of substrates.It has a good hiding power, smooth finishing, easy to sand, can be sprayed over by all GESPAINT topcoats.
(VOC/COV's < 780 g/l)
OPAFILLER 2K
2K ACRYLIC FILLER with fast drying adapted for all types of car refinish repairs. It is giving high build, by thickness, with smooth surface aspect, which gives easy sanding process. Easy to sand.(VOC/COV's < 540 g/l)
OPASEALER 2K
2K TRANSPARENT SEALER has an exceptional adhesion, used in wet on wet system (without sanding process). It can be sprayed over all existing original topcoat finishing. It is specially recommended, for colour fleet changes on recent vehicles.(VOC/COV's < 540 g/l)
OPAPLASTIC 1K
1K PRIMER designed lor recoating all plastic spare parts, before spraying all kind of GESPAINT Topcoats. Allow excellent chemical adhesion, with last drying, with flexible proprieties.(VOC/COV's < 840 g/l)
OPAPLASTIC 2K
2K PRIMER DESIGNED FOR PREPARATION OF ALL PLASTIC PARTS, allows excellent chemical adhesion on all existing plastic in automotive industry. The drying time is last, with smooth surface aspect giving best finishing.(VOC/COV's < 840 g/l)
ADDITIVES
OPAFLEXI
ADDITIVE for giving flexibilily to GESPAINT 2K products, specially for GESPAINT topcoat when its sprayed on plastics parts, which improve the adhesion with less peeling risk.
OPAMAT
ADDITIVE for matting glossy GESPAINT top coat, by giving several possiblegloss grade aspects.
